Tag Archives: Weather

The veggies are in

For the most part the vegetables are in. I had planned on getting more done this weekend but I do tend to plan more than I can accomplish. I had to work with the tiller a bit to get it to start. It had some old gas in it from last year. Last spring some time I tried using it and I couldn’t keep it running. I was about done at the time so I didn’t fool with it then. The plan was to take it in and have it looked at before this season. Well the time got away from me and the cars took all the extra money I had sooooo it was up to me. I ended up emptying out the old gas by removing the line from the carb and draining it from the tank. I put some fresh gas in but as I suspected it didn’t start. There was still some old stuff in the lines. I took the air filter off and put a little bit of new gas in directly in the carb and she fired right up. After a warm up and some wd40 in the linkage we were good to go.

I only tilled half the area I usually do. I just don’t have time to keep up with so much and rather than plant it and let it go I will just keep those areas mowed for this season. Today I planted 16 tomato plants – 6 Mr Stripey, 7 Big Beef and 6 Jetsetter. I still have some more BB and a few Celebrity that will need to go in. I am holding them back to see what the deer leave me. I may need those as replacements. I also planted 4 hills of watermelon, some little round guy not sure of the name, a couple of hills of zucchini and 4 rows of flour corn. I picked it up from the Native Seed Search and it is called Tohono O’odham. It is a 60 day flour corn from the south west. Since June and July tend to be dryer here I decided to plant it now. It is supposed to be more drought tolerant than many other varieties. The plan is to plant some beans with the corn once it gets up a little bit. Since I didn’t plant THAT much I may end up hand pollinating.

Yesterday we mowed the lawn and I mowed over about 200 raspberry plants to get my two beds back in shape. I hated to do it but I had offered them to several people and nobody was interested. They would take over the back half of the property if I didn’t keep them in check.

The image above is an Indigo Doll iris that had fallen over onto the Coreopsis next to it. She is pretty. Can you see the little visitor on the right?

The weather station that I put up last week is now connected to the computer and the data is being transmitted to the net. It took some fiddling but it’s all good now. I was doing the transmission from the outdoor unit to the base unit in the house wirelessly but they would lose each other occasionally which would result in a temp reading of 177F. It has been warm the last couple of days but nowhere near that warm. Once I connected them via some outdoor telephone wire there hasn’t been any bad data. Burying the cable was easy enough. I used an edger to cut the slit and a skinny piece of wood to push the cable down into the ground. It didn’t have to go down far just far enough to be out of the way. If you are interested, the page the station transmits to is located at the Weather Underground.

Weather Station

Ok so I was finally able to get the weather station that I ordered from Amazon a couple of weeks ago installed. I paid $44 but it looks like they’ve bumped the price up to $99 as of today. I’ve been looking at the box sitting in my room for well over a week and anyone that knows me knows patience is not one of my virtues. Between the weather (very rainy) and the vehicles (1 new water pump + new rear brakes), today is the first day I’ve had that I’ve been able to get outside and get the post in the ground and get everything hooked up. Now if I could only find that compass I could get the wind thingy to report the correct wind direction. One thing at a time…

I decided not to sink the pole in cement yet as I am not sure it will end up staying where it is. The anemometer (aka wind thingy) is only there temporarily. It will end up on the old antenna mast once I get that mess taken care of. The rain unit will end up on top of the pole so there is nothing blocking it. The temp/humidity sensor is inside the inverted bowls. I used some directions I found on the net, $3 worth of Dollar Store bowls, a little hardware and we are good to go. The idea is to keep the temp sensor out of the direct sun. The bowls have holes allowing air circulation with the sensor in the middle. I’m not looking to be the next Rich Apuzzo so I think this should give me what I need. The temp and rain sensors are the ones I care most about. I want to know how much rain we are actually getting here vs what Williamstown (several miles away) is getting. Knowing the temps will come in handy this fall when the frosts begin.

I have the base unit in the house and right now it is receiving data wirelessly. Yes those are wires on the pole, the anemometer and rain gauge are connected to the temp/humidity sensor/transmitter via wires. I can then go wired or wireless from the transmitter to the base unit. The benefit of the wire is that you get more frequent updates from the sensors but the downside is I have to bury the wire and hope the moles to mistake it for a worm.